sksp2024-mcu/libopencm3/scripts/data/lpc43xx/creg.yaml

!!omap
- CREG_CREG0:
    fields: !!omap
    - EN1KHZ:
        access: rw
        description: Enable 1 kHz output
        lsb: 0
        reset_value: '0'
        width: 1
    - EN32KHZ:
        access: rw
        description: Enable 32 kHz output
        lsb: 1
        reset_value: '0'
        width: 1
    - RESET32KHZ:
        access: rw
        description: 32 kHz oscillator reset
        lsb: 2
        reset_value: '1'
        width: 1
    - PD32KHZ:
        access: rw
        description: 32 kHz power control
        lsb: 3
        reset_value: '1'
        width: 1
    - USB0PHY:
        access: rw
        description: USB0 PHY power control
        lsb: 5
        reset_value: '1'
        width: 1
    - ALARMCTRL:
        access: rw
        description: RTC_ALARM pin output control
        lsb: 6
        reset_value: '0'
        width: 2
    - BODLVL1:
        access: rw
        description: BOD trip level to generate an interrupt
        lsb: 8
        reset_value: '0x3'
        width: 2
    - BODLVL2:
        access: rw
        description: BOD trip level to generate a reset
        lsb: 10
        reset_value: '0x3'
        width: 2
    - SAMPLECTRL:
        access: rw
        description: SAMPLE pin input/output control
        lsb: 12
        reset_value: '0'
        width: 2
    - WAKEUP0CTRL:
        access: rw
        description: WAKEUP0 pin input/output control
        lsb: 14
        reset_value: '0'
        width: 2
    - WAKEUP1CTRL:
        access: rw
        description: WAKEUP1 pin input/output control
        lsb: 16
        reset_value: '0'
        width: 2
- CREG_M4MEMMAP:
    fields: !!omap
    - M4MAP:
        access: rw
        description: Shadow address when accessing memory at address 0x00000000
        lsb: 12
        reset_value: '0x10400000'
        width: 20
- CREG_CREG5:
    fields: !!omap
    - M4TAPSEL:
        access: rw
        description: JTAG debug select for M4 core
        lsb: 6
        reset_value: '1'
        width: 1
    - M0APPTAPSEL:
        access: rw
        description: JTAG debug select for M0 co-processor
        lsb: 9
        reset_value: '1'
        width: 1
- CREG_DMAMUX:
    fields: !!omap
    - DMAMUXPER0:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 0
        lsb: 0
        reset_value: '0'
        width: 2
    - DMAMUXPER1:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 1
        lsb: 2
        reset_value: '0'
        width: 2
    - DMAMUXPER2:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 2
        lsb: 4
        reset_value: '0'
        width: 2
    - DMAMUXPER3:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 3
        lsb: 6
        reset_value: '0'
        width: 2
    - DMAMUXPER4:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 4
        lsb: 8
        reset_value: '0'
        width: 2
    - DMAMUXPER5:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 5
        lsb: 10
        reset_value: '0'
        width: 2
    - DMAMUXPER6:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 6
        lsb: 12
        reset_value: '0'
        width: 2
    - DMAMUXPER7:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 7
        lsb: 14
        reset_value: '0'
        width: 2
    - DMAMUXPER8:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 8
        lsb: 16
        reset_value: '0'
        width: 2
    - DMAMUXPER9:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 9
        lsb: 18
        reset_value: '0'
        width: 2
    - DMAMUXPER10:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 10
        lsb: 20
        reset_value: '0'
        width: 2
    - DMAMUXPER11:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 11
        lsb: 22
        reset_value: '0'
        width: 2
    - DMAMUXPER12:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 12
        lsb: 24
        reset_value: '0'
        width: 2
    - DMAMUXPER13:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 13
        lsb: 26
        reset_value: '0'
        width: 2
    - DMAMUXPER14:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 14
        lsb: 28
        reset_value: '0'
        width: 2
    - DMAMUXPER15:
        access: rw
        description: Select DMA to peripheral connection for DMA peripheral 15
        lsb: 30
        reset_value: '0'
        width: 2
- CREG_FLASHCFGA:
    fields: !!omap
    - FLASHTIM:
        access: rw
        description: Flash access time. The value of this field plus 1 gives the number
          of BASE_M4_CLK clocks used for a flash access
        lsb: 12
        reset_value: ''
        width: 4
    - POW:
        access: rw
        description: Flash bank A power control
        lsb: 31
        reset_value: '1'
        width: 1
- CREG_FLASHCFGB:
    fields: !!omap
    - FLASHTIM:
        access: rw
        description: Flash access time. The value of this field plus 1 gives the number
          of BASE_M4_CLK clocks used for a flash access
        lsb: 12
        reset_value: ''
        width: 4
    - POW:
        access: rw
        description: Flash bank B power control
        lsb: 31
        reset_value: '1'
        width: 1
- CREG_ETBCFG:
    fields: !!omap
    - ETB:
        access: rw
        description: Select SRAM interface
        lsb: 0
        reset_value: '1'
        width: 1
- CREG_CREG6:
    fields: !!omap
    - ETHMODE:
        access: rw
        description: Selects the Ethernet mode. Reset the ethernet after changing
          the PHY interface
        lsb: 0
        reset_value: ''
        width: 3
    - CTOUTCTRL:
        access: rw
        description: Selects the functionality of the SCT outputs
        lsb: 4
        reset_value: '0'
        width: 1
    - I2S0_TX_SCK_IN_SEL:
        access: rw
        description: I2S0_TX_SCK input select
        lsb: 12
        reset_value: '0'
        width: 1
    - I2S0_RX_SCK_IN_SEL:
        access: rw
        description: I2S0_RX_SCK input select
        lsb: 13
        reset_value: '0'
        width: 1
    - I2S1_TX_SCK_IN_SEL:
        access: rw
        description: I2S1_TX_SCK input select
        lsb: 14
        reset_value: '0'
        width: 1
    - I2S1_RX_SCK_IN_SEL:
        access: rw
        description: I2S1_RX_SCK input select
        lsb: 15
        reset_value: '0'
        width: 1
    - EMC_CLK_SEL:
        access: rw
        description: EMC_CLK divided clock select
        lsb: 16
        reset_value: '0'
        width: 1
- CREG_M4TXEVENT:
    fields: !!omap
    - TXEVCLR:
        access: rw
        description: Cortex-M4 TXEV event
        lsb: 0
        reset_value: '0'
        width: 1
- CREG_M0TXEVENT:
    fields: !!omap
    - TXEVCLR:
        access: rw
        description: Cortex-M0 TXEV event
        lsb: 0
        reset_value: '0'
        width: 1
- CREG_M0APPMEMMAP:
    fields: !!omap
    - M0APPMAP:
        access: rw
        description: Shadow address when accessing memory at address 0x00000000
        lsb: 12
        reset_value: '0x20000000'
        width: 20
- CREG_USB0FLADJ:
    fields: !!omap
    - FLTV:
        access: rw
        description: Frame length timing value
        lsb: 0
        reset_value: '0x20'
        width: 6
- CREG_USB1FLADJ:
    fields: !!omap
    - FLTV:
        access: rw
        description: Frame length timing value
        lsb: 0
        reset_value: '0x20'
        width: 6