You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
127 lines
4.3 KiB
127 lines
4.3 KiB
|
|
/** @addtogroup spi_file SPI peripheral API
|
|
* @ingroup peripheral_apis
|
|
|
|
@author @htmlonly © @endhtmlonly 2009
|
|
Uwe Hermann <uwe@hermann-uwe.de>
|
|
@author @htmlonly © @endhtmlonly 2012
|
|
Ken Sarkies <ksarkies@internode.on.net>
|
|
|
|
Devices can have up to three SPI peripherals. The common 4-wire full-duplex
|
|
mode of operation is supported, along with 3-wire variants using unidirectional
|
|
communication modes or half-duplex bidirectional communication. A variety of
|
|
options allows many of the SPI variants to be supported. Multimaster operation
|
|
is also supported. A CRC can be generated and checked in hardware.
|
|
|
|
@note Some JTAG pins need to be remapped if SPI is to be used.
|
|
|
|
@note The I2S protocol shares the SPI hardware so the two protocols cannot be
|
|
used at the same time on the same peripheral.
|
|
|
|
Example: Clk/4, positive clock polarity, leading edge trigger, 8-bit words,
|
|
LSB first.
|
|
@code
|
|
spi_init_master(SPI1, SPI_CR1_BAUDRATE_FPCLK_DIV_4, SPI_CR1_CPOL_CLK_TO_0_WHEN_IDLE,
|
|
SPI_CR1_CPHA_CLK_TRANSITION_1, SPI_CR1_DFF_8BIT, SPI_CR1_LSBFIRST);
|
|
spi_write(SPI1, 0x55); // 8-bit write
|
|
spi_write(SPI1, 0xaa88); // 16-bit write
|
|
reg8 = spi_read(SPI1); // 8-bit read
|
|
reg16 = spi_read(SPI1); // 16-bit read
|
|
@endcode
|
|
|
|
@todo need additional functions to aid ISRs in retrieving status
|
|
|
|
*/
|
|
|
|
/*
|
|
* This file is part of the libopencm3 project.
|
|
*
|
|
* Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
|
|
*
|
|
* This library is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU Lesser General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public License
|
|
* along with this library. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <libopencm3/stm32/spi.h>
|
|
#include <libopencm3/stm32/rcc.h>
|
|
|
|
|
|
/**@{*/
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief Configure the SPI as Master.
|
|
|
|
The SPI peripheral is configured as a master with communication parameters
|
|
baudrate, data format 8/16 bits, frame format lsb/msb first, clock polarity
|
|
and phase. The SPI enable, CRC enable and CRC next controls are not affected.
|
|
These must be controlled separately.
|
|
|
|
To support multiple masters (dynamic switching between master and slave)
|
|
you must set SSOE to 0 and select either software or hardware control of
|
|
the NSS pin.
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
@param[in] br Unsigned int32. Baudrate @ref spi_baudrate.
|
|
@param[in] cpol Unsigned int32. Clock polarity @ref spi_cpol.
|
|
@param[in] cpha Unsigned int32. Clock Phase @ref spi_cpha.
|
|
@param[in] dff Unsigned int32. Data frame format 8/16 bits @ref spi_dff.
|
|
@param[in] lsbfirst Unsigned int32. Frame format lsb/msb first @ref
|
|
spi_lsbfirst.
|
|
@returns int. Error code.
|
|
*/
|
|
|
|
int spi_init_master(uint32_t spi, uint32_t br, uint32_t cpol, uint32_t cpha,
|
|
uint32_t dff, uint32_t lsbfirst)
|
|
{
|
|
uint32_t reg32 = SPI_CR1(spi);
|
|
|
|
/* Reset all bits omitting SPE, CRCEN and CRCNEXT bits. */
|
|
reg32 &= SPI_CR1_SPE | SPI_CR1_CRCEN | SPI_CR1_CRCNEXT;
|
|
|
|
reg32 |= SPI_CR1_MSTR; /* Configure SPI as master. */
|
|
|
|
reg32 |= br; /* Set baud rate bits. */
|
|
reg32 |= cpol; /* Set CPOL value. */
|
|
reg32 |= cpha; /* Set CPHA value. */
|
|
reg32 |= dff; /* Set data format (8 or 16 bits). */
|
|
reg32 |= lsbfirst; /* Set frame format (LSB- or MSB-first). */
|
|
|
|
SPI_CR2(spi) |= SPI_CR2_SSOE; /* common case */
|
|
SPI_CR1(spi) = reg32;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Data Frame Format to 8 bits
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_dff_8bit(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) &= ~SPI_CR1_DFF;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** @brief SPI Set Data Frame Format to 16 bits
|
|
|
|
@param[in] spi Unsigned int32. SPI peripheral identifier @ref spi_reg_base.
|
|
*/
|
|
|
|
void spi_set_dff_16bit(uint32_t spi)
|
|
{
|
|
SPI_CR1(spi) |= SPI_CR1_DFF;
|
|
}
|
|
|
|
/**@}*/
|
|
|