KSP
/
sksp2024-mcu
42
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Workshop o mikrokontrolérech na SKSP 2024.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
13 Commits
1 Branch
0 Tags
11 MiB
 
 
 
 
 
 
Tree: 614369f83b
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '614369f83b'
${ noResults }
sksp2024-mcu/libopencm3/scripts/data/lpc43xx/adc.yaml

607 lines
19 KiB
Raw Blame History

!!omap
- ADC0_CR:
fields: !!omap
- SEL:
access: rw
description: Selects which of the ADCn_[7:0] inputs are to be sampled and
converted
lsb: 0
reset_value: '0'
width: 8
- CLKDIV:
access: rw
description: The ADC clock is divided by the CLKDIV value plus one to produce
the clock for the A/D converter
lsb: 8
reset_value: '0'
width: 8
- BURST:
access: rw
description: Controls Burst mode
lsb: 16
reset_value: '0'
width: 1
- CLKS:
access: rw
description: This field selects the number of clocks used for each conversion
in Burst mode and the number of bits of accuracy of the result in the LS
bits of ADDR, between 11 clocks (10 bits) and 4 clocks (3 bits).
lsb: 17
reset_value: '0'
width: 3
- PDN:
access: rw
description: Power mode
lsb: 21
reset_value: '0'
width: 1
- START:
access: rw
description: Controls the start of an A/D conversion when the BURST bit is
0
lsb: 24
reset_value: '0'
width: 3
- EDGE:
access: rw
description: Controls rising or falling edge on the selected signal for the
start of a conversion
lsb: 27
reset_value: '0'
width: 1
- ADC1_CR:
fields: !!omap
- SEL:
access: rw
description: Selects which of the ADCn_[7:0] inputs are to be sampled and
converted
lsb: 0
reset_value: '0'
width: 8
- CLKDIV:
access: rw
description: The ADC clock is divided by the CLKDIV value plus one to produce
the clock for the A/D converter
lsb: 8
reset_value: '0'
width: 8
- BURST:
access: rw
description: Controls Burst mode
lsb: 16
reset_value: '0'
width: 1
- CLKS:
access: rw
description: This field selects the number of clocks used for each conversion
in Burst mode and the number of bits of accuracy of the result in the LS
bits of ADDR, between 11 clocks (10 bits) and 4 clocks (3 bits).
lsb: 17
reset_value: '0'
width: 3
- PDN:
access: rw
description: Power mode
lsb: 21
reset_value: '0'
width: 1
- START:
access: rw
description: Controls the start of an A/D conversion when the BURST bit is
0
lsb: 24
reset_value: '0'
width: 3
- EDGE:
access: rw
description: Controls rising or falling edge on the selected signal for the
start of a conversion
lsb: 27
reset_value: '0'
width: 1
- ADC0_GDR:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADCn pin selected by the SEL field, divided by the reference
voltage on the VDDA pin
lsb: 6
reset_value: '0'
width: 10
- CHN:
access: r
description: These bits contain the channel from which the LS bits were converted
lsb: 24
reset_value: '0'
width: 3
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an analog-to-digital conversion completes.
It is cleared when this register is read and when the AD0/1CR register is
written
lsb: 31
reset_value: '0'
width: 1
- ADC1_GDR:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADCn pin selected by the SEL field, divided by the reference
voltage on the VDDA pin
lsb: 6
reset_value: '0'
width: 10
- CHN:
access: r
description: These bits contain the channel from which the LS bits were converted
lsb: 24
reset_value: '0'
width: 3
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an analog-to-digital conversion completes.
It is cleared when this register is read and when the AD0/1CR register is
written
lsb: 31
reset_value: '0'
width: 1
- ADC0_INTEN:
fields: !!omap
- ADINTEN:
access: rw
description: These bits allow control over which A/D channels generate interrupts
for conversion completion
lsb: 0
reset_value: '0'
width: 8
- ADGINTEN:
access: rw
description: When 1, enables the global DONE flag in ADDR to generate an interrupt.
When 0, only the individual A/D channels enabled by ADINTEN 7:0 will generate
interrupts.
lsb: 8
reset_value: '1'
width: 1
- ADC1_INTEN:
fields: !!omap
- ADINTEN:
access: rw
description: These bits allow control over which A/D channels generate interrupts
for conversion completion
lsb: 0
reset_value: '0'
width: 8
- ADGINTEN:
access: rw
description: When 1, enables the global DONE flag in ADDR to generate an interrupt.
When 0, only the individual A/D channels enabled by ADINTEN 7:0 will generate
interrupts.
lsb: 8
reset_value: '1'
width: 1
- ADC0_DR0:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC0 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR0:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC0 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_DR1:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC1 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR1:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC1 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_DR2:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC2 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR2:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC2 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_DR3:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC3 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR3:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC3 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_DR4:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC4 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR4:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC4 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_DR5:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC5 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR5:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC5 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_DR6:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC6 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR6:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC6 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_DR7:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC7 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC1_DR7:
fields: !!omap
- V_VREF:
access: r
description: When DONE is 1, this field contains a binary fraction representing
the voltage on the ADC7 pin divided by the reference voltage on the VDDA
pin
lsb: 6
reset_value: '0'
width: 10
- OVERRUN:
access: r
description: This bit is 1 in burst mode if the results of one or more conversions
was (were) lost and overwritten before the conversion that produced the
result in the V_VREF bits in this register.
lsb: 30
reset_value: '0'
width: 1
- DONE:
access: r
description: This bit is set to 1 when an A/D conversion completes.
lsb: 31
reset_value: '0'
width: 1
- ADC0_STAT:
fields: !!omap
- DONE:
access: r
description: These bits mirror the DONE status flags that appear in the result
register for each A/D channel.
lsb: 0
reset_value: '0'
width: 8
- OVERRUN:
access: r
description: These bits mirror the OVERRRUN status flags that appear in the
result register for each A/D channel.
lsb: 8
reset_value: '0'
width: 8
- ADINT:
access: r
description: This bit is the A/D interrupt flag. It is one when any of the
individual A/D channel Done flags is asserted and enabled to contribute
to the A/D interrupt via the ADINTEN register.
lsb: 16
reset_value: '0'
width: 1